How To Install The Air Cooled Chiller

How To Install The Air Cooled Chiller ?

The air-cooled chiller's condenser is finned, and the fan is installed on the top of chiller, it's used to dissipate heat to achieve heat exchange.

Compare with water cooled chiller, air cooled chiller's installation is much simpler, as long as the air-cooled chiller and user equipment connect through pipes.

The specific installation procedure is as follows:

• Before installation, should choose a flat open space. It is best to re-build the cement foundation to ensure the levelness of the ground. After the installation, there must be a free space for future maintenance, and ensure that the ground can withstand Maintain the operating weight of the chiller.

• Different chiller model with different inlet and outlet diameters. When installing, should choose water pipes with matching diameters and connect them correctly.

• No matter under any load conditions, should ensure that the chiller's water flow is normal and stable.

• The design and installation of water pipes should be carried out in accordance with relevant standards, and the water pump should be located higher than water inlet pipe, to ensure the positive pressure and flow of the unit.

• Water pipe should have a firm support independent of the chiller, avoiding the force exerted on components of an air-cooled chiller. To reduce noise and vibration, it is best to install vibration Isolators on the piping.

• In order to the air-cooled chiller can running safely and stably, to ensure the normal use of each component, the poor water quality can be treated to avoid various sundries or corrosion deposits and the existence of pipes, evaporators, and condensers that affect the heat exchange effect , increasing maintenance costs in the later period.